Material: Nitrile Rubber
Application: Household Appliance, Electronic Product, Industrial Component, Machinery
Effect: Hole with Seal
Cross-Section Shape: O-Rings
Packaging: Normal packing in bags and in the carton.Packing as customer's request.
Neoprene Seal or Neoprene Rubber Oil Seals is an extremely versatile material that can be found in virtually every industry across the board. It can be die-cut, water jet cut, slit, molded and is available with pressure sensitive adhesive.
Neoprene is usually supplied in sheet or roll form.
What is Neoprene Seals or Neoprene Rubber Oil Seals?
Neoprene is a material made from synthetic rubber designed to be flexible, durable, resilient, and very resistant to compression and liquids such as water, oil, and other solvents. Neoprene gaskets are generally made for sealing applications.
An additional benefit of using 50 durometer Neoprene for this particular application, is the fact that Neoprene Rubber Seals have good resistance to water absorption, very good resistance to abrasion, oxidation, ozone and sunlight aging.
The Neoprene gasket or Neoprene Seal, Neoprene oil seal offers a variety of different solutions for many different applications. Neoprene Rubber Seals is an extremely diverse material that can handle some of the toughest conditions.
Standard O-Ring Material Applications
We offer the following six standard rubber materials in a range of durometer hardnesses to satisfy practically any service condition:
Viton / FKM O-Ring: Fluorocarbon exhibits exceptional resistance to chemicals, oils, temperature extremes (-13°F to +446°F), low compression set, low gas permeability and excellent aging characteristics. Applications include: aircraft engines, automotive fuel handling systems, and chemical processing industries. FKM is also suitable for high vacuum applications. It is not recommended for exposure to ketones, alkalis, and Skydrol? fluids. Custom compounds are available with improved chemical and low temperature resistance.
Nitrile / NBR O-Ring: Nitrile (Buna-N) is the most widely used elastomer due to its excellent resistance to petroleum products, operating temperature range (-40°F to +257°F) and one of the best performance-to-cost values. It's an ideal material for aerospace, automotive, propane and natural gas applications. Special Hydrogenated Nitrile (HNBR) compounds can improve resistance to direct ozone, sunlight, and weather exposure while increasing temperature range to +300°F.
Ethylene-Propylene / EPDM O-Ring: EPDM has outstanding resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight (-40oF to +275oF); but it is not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments. This popular rubber compound is usually the first choice for low torque drive belt applications.
Fluorosilicone / FVMQ O-Ring: Fluorosilicone (-75o to +400oF) combines the good high and low temperature stability of silicones with the fuel, oil, and solvent resistance of fluorocarbons. FVMQ is unparalleled for aerospace fuel systems, auto fuel emission control systems and to meet or exceed government, military, aerospace, automotive, industrial and commercial specifications. However, due to relatively low tear strength, high friction and limited abrasion resistance of these materials, they are generally not used in dynamic applications. They are also not recommended for exposure to brake fluids, hydrazine, or ketones.
Silicone / VMQ O-Ring: In the Silicone family, you will find compounds which are superior as static seals in extreme temperature conditions. Standard compounds handle operating temperatures -85o to +400oF. Silicone compounds are popular in food and medical applications because they are very clean and do not impart odor or taste. Special Phenyl silicones can be used down to -148°F.
Neoprene / CR O-Ring: Neoprene (-40o to +250oF) is reasonably priced and features good resistance to petroleum oils, ozone, sunlight and oxygen aging, relatively low compression set, good resilience and outstanding physical toughness.
Q: Can you produce as my drawing?
A: Yes, we can produce based on your drawing or sizes.
Q: How long is your delivery time?
A: Generally it is 1-2 days if the goods are in stock. or it is 10-15 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but you need to pay the cost of freight.
Q: What express do you use to send the samples?
A: We usually ship samples by DHL, TNT, FEDEX and UPS. It usually takes 3-5 days to arrive.